10.22.07

Podcasting kit - the setup and how it works.

Posted in Podcasting blog, Silesti Podcasts at 7:07 pm by JohnB

My Podcast kit - Enhanced version [6:52m]: Play Now | Play in Popup | Download

My Podcast kit [6:52m]: Play Now | Play in Popup | Download

I thought I’d make this ‘Silesti Podcast’ an introduction and overview of the podcasting kit I’m currently using.
When I first developed an interest in podcasting I really didn’t know what I was doing but as time has gone on I’m learning more and more and developing a keen interest in getting the best results out of decent but not too costly equipment.

To that end I’m going to give you a run through of my current setup, provide my thoughts on each of the bits of kit and look forward to how things will move forward (I hope) in the future.

Starting at the top of the stack with the mic. I’m currently recording using a Samson C01 condenser which I think provides a very good sound given its low price point. Now… I know that it’s not perfect, I know that there are audiophiles out there who will talk about various shortcomings, but the bottom line for me is, how does it sound? And for podcasts I think it sounds fine.

Also attached to the spider mount for the C01 is a Logitech Desktop PC mic, this has been stripped of its desktop base and is now held in place by the elastic shock mount straps which I’ve re-positioned so that the C01 remains central in its cradle. The Logitech mic is there to allow for the recording of phone conversations using either Skype or my Voiptalk softphone, my voice gets captured by the C01 for local recording and taken by the Logitech for transmission onwards for the caller.

The C01 is connected to an Alesis Multimix8 USB mixer which is a really nice bit of kit. I’m no connoisseur of mixing desks but, again, for the price this seems to do everything I want. When I started I was using the USB as the output and recording using Propaganda on the PC, but now I’ve moved on and I’m using Garageband on a new iMac.

Now, I know that the Mac has USB too and I did try this method of connectivity but for some reason when I plug the mixer in to the Mac, the Line Out in the Mac stop working. It’s as if, regardless of my desktop settings, the USB interface takes precedence. It’s no biggy really, as I now use the Main Mix out to the Mac’s Line In and record from there. The Mac’s Line Out is used to playback and connects to the 2-track In on the mixer, which I’ve switched to the headphones, not the mix. My only regret is that I didn’t have 3 months for-thought and buy the (albeit more expensive) Firewire version of the Multimix and I would ideally like to record each channel separately, but maybe I’ll upgrade at some point!

Hang on though.. multi channel! I’ve only talked about one mic so far… that’s hardly even deserving of a mixer at all! But no… remember the phone conversations? Well the output from my PC, carrying the voice of my caller is routed to one of the input channels of the mixer too. In practice that means that the far end of the conversation appears in my headphones and comes through the mix and my end of the conversation is dropped straight into the mix as well as going via the PC. Pretty neat I think!

So we’ve done Mic – check. Mixer – check. Recording platform – check. Telephony interaction – check. Aha.. headphones!
I’m using a pair of Sennheiser HD 201 headphones for monitoring and playback. They’re the circum-aural type, which I prefer and they are also quite cheap. (remember we’re doing this on a reasonably affordable budget if possible!). I would love to try a really decent set of studio headphones, just to see what the difference is, but for now, I’m actually very happy with the reproduction I’m getting with the 201’s so that’s something very much for the future.

There are a couple of other elements I’m considering, I would LOVE to try a vocal strip. My dream is to have a Symetrix 528E to play around with, the Aphex 230 or DBX 286a would be my second choice (and a more reasonable cost). I’ve spoken with a couple of folks who prefer to record straight and do the smoothing work with software and plug ins and I think that a pretty good approach to so I’m kind of torn.. I do like buttons and switches though and, again, it makes it LOOK like a studio! YES I know I’m shallow!
So that’s everything covered I think. If you’ve any ideas or comments on what I’ve got so far, please feel free to comment on this post. Until next time then.. Cheers!

Permalink 1 Comment

10.15.07

Microsoft wants your helpdesk data on Exchange

Posted in Work at 9:14 am by JohnB

Microsoft put out a request on their “You had me at EHLO” blog for helpdesk information from end users. They are looking for this information so that they can identify key areas for improvement in future releases. The key type of information they are looking for is:-

Preferred: Helpdesk call data specific to exchange & outlook end-users, with volume information (e.g. # of calls for each issue + length of each call), organized by root cause (example: size restriction configured incorrectly on connector resulted in NDRs)
Acceptable: Helpdesk call data specific to exchange & outlook end-users, with volume information (e.g. # of calls for each issue + length of each call), organized by symptom (example: user received 5.2.2 NDR)

And of course they are requesting that any personally identifiable data is cleaned before being sent in.

The full article can be found here so if you think you have something you’d like to send in have a read and get in touch.

Permalink Comments

10.11.07

Microphone group test - Samson C01, Sennheiser e285S, Shure SM57 / SM58

Posted in Podcasting blog, Silesti Podcasts at 7:14 pm by JohnB

Samson C01, Sennheiser e285S, Shure SM57 / SM58 [2:05m]: Play Now | Play in Popup | Download

I decided a little while ago to find out what different microphones sound like, within my limited budget. I’m sure that a Rode Broadcaster will blow me away, but unless I’m gifted one I’m not likely to find out any time soon!!

So I decided to pick up a couple of the most commonly talked about mic’s and put them up against my first buy, the Samson C01.

My test involves the back to back use of all four mic’s through the same mixer on the same settings to get a like-for-like picture. I used the Rudyard Kipling poem “If” as the medium for this test. I like it and it handily has four verses too.

The outcome has, I have to say, made me very happy. The Samson provides me with a good sound (there is a little clipping in the recording, but I wanted to keep everything set the same for the comparison!) and I think gives the nicest representation of my voice.

A good second place was the Shure SM57, I was using this one without any foam wind screen in place but avoided any significant noise as I was talking slightly sideways on to the face of the mic itself. The sound reproduction doesn’t seem quite as deep as the C01 but it’s not far away.

The SM58 comes in a close third. I was actually expecting a little more from this one, but I think that it takes some getting used too. I’ve heard examples (and actually had a play too) of the difference in the type of response you can get from this mic simply by moving closer in to it. It actually does sound really rich when you speak directly into it with you mouth almost touching the grill, but I don’t like that and prefer to be able to move around a little.

The Sennheiser came WAY down. I realise that the model is an old one but given what I know it cost at the time I was expecting something a lot better. I sound like I have a bad dose of the flu! There is no depth at all and it’d take a conscious effort to actually spend any time listening to it. It’s going back into it’s back and will only come out if I have to do bingo calling!

I’m happy with the outcome of my little experiment. It has, of course, led to me identifying a further requirement… I need a vocal strip to sort out some of the background noise and hiss! Ah well, here’s to hoping that the Aphex/DBX/Symetrix fairy smiles down on me!